Formetco

SIGN-VUE LED

Sign VUE LED Lighting Sign VUE LED Lighting Sign VUE LED Lighting
Click to see product details
REDUCE ENERGY COSTS AND OUTAGES WITH THE NEW SIGN-VUE® LED FIXTURES DEVELOPED BY HOLOPHANE. A NEW SIGN LIGHT WORTHY OF THE HOLOPHANE NAME.

TheSign-Vue LED Series is a state-of-the-art sustainable solution for a wide range of Media and DOT signage applications. The Sign-Vue LED was designed as a one-for-one replacement of Sign-Vue and Panel-Vue units or similar competitive products. With an 82% reduction in both energy consumption and CO2 emissions, and a 50% reduction in maintenance costs, the Sign-Vue LED will prove to be the industry standard for outdoor sign lighting. Finally, an LED sign light worthy of the name of the industry's largest most reputable manufacturer... Holophane!

Features and Benefits:

  • Built in Surge Protection
  • 25 Year Life
  • Field Selectable Light Levels 40-60-80 Watt
  • Optional Defrost Mode
  • Quick Disconnect Connectors for Ease of Installation and Maintenance
Download Sign VUE LED lighting product PDF cut sheet

You may also be interested in:

HoloPhane Lighting

Holophane Lighting

The best system on earth.

TECHNICAL DATA

  • The robust cast aluminum housing provides a sealed enclosure for the electronic driver and electrical components. Heavy duty hinges and tool-less latches provide access to the electrical compartment and the driver. A pre-wired three-station terminal block accepts #16 through #8 wires. The housing is designed to fit a standard 1.25" round or 1.5" square pipe, top or bottom mount.
  • Cast of aluminum, the optical door swings open via a heavy duty tool-less latch and provides access to the LED Driver and electrical components which are isolated for improved thermal management. Also accessible through the housing door is the terminal block and heavy duty surge protection device.
  • Three highly engineered and multi-faceted clamshell reflectors with 90+% reflectivity provide uniform overlapping and repeatable distribution from each module eliminating dark spots.
  • Multi-current driver to allow for field adaptability of light levels by setting drive current for 350Ma, 525 Ma, or 700 Ma. Driver is removable through access door. (Refer to Data Sheet for specific operating characteristics). Potted for increased thermal management.
  • The luminaire is finished with polyester powder paint applied after a pretreatment process to provide maximum durability. The finish shall pass the 1000 hour salt fog test per ATSM standard B117.
  • The luminaire is CSA listed and is suitable for wet locations up to 40°C ambient temperature, depending on wattage. The Optical Housing is IP66 rated and the Electrical Housing is IP65 rated.
  • The optical system consists of high output multi-die "chip-on-board" (COB) technology which means less solder points with more reliability and superior light control. The optical system utilizes three COB modules, each with a dedicated reflector that provides an overlapping, uniform distribution of bright white 5000K light. A Flat glass optical cover comes with an optional lens "defrost" feature for climates with heavy snow & ice.
Request More Info



Share on Facebook
Share on Twitter
Share via Email

This product is part of the Formetco Green Product Line